Design Criteria:: | CNS, JIS, K5400, Z2371, ASTM | Certificate:: | ISO9001:2008 |
---|---|---|---|
Temperature Fluctuations:: | ≤±0.5℃ | Temperature Uniformity:: | ≤±2℃ |
Warranty:: | 1 Year | Power:: | Electronic |
Temperature Range: | 35°C~55°C | Brine Temperature: | 35°C±1°C |
High Light: | Salt Spray Corrosion Environmental Growth Chamber,Electronic Benchtop Environmental Test Chamber,Laboratory Walk In Environmental Chamber |
Laboratory Electronic Salt Spray Corrosion Test Chamber
Salt Spray Corrosion Test Chamber adapted to the surface treatment of various materials, including paint, electroplating, organic and inorganic coating, anode processing, antirust oil and so on, after these anti-corrosive treatment to test the corrosion resistance of their products.
Specifications:
Model | BT-E808 |
Inner Box Size (L×W×H) | 90×60×50 cm |
Outside Box Size(L×W×H) | 141×88×128 cm |
Equipment Material | Both inside & outside shell adopt imported P.V.C rigid plastic board, and tank cover uses imported transparent P.V.C. rigid plastic board |
Temperature Range | 35°C~55°C |
Temperature Fluctuations | ≤±0.5°C |
Temperature Uniformity | ≤±2°C |
Temperature Precision | ±1°C |
Test Chamber Temperature |
Salt Spray Method (NSS ACSS)35±1°C Corrosion-resistant Testing Method(CASS)50±1°C |
Saturated air Barrel Temperature | Salt Spray Method (NSS ACSS)47±1°C Corrosion-resistant Testing Method(CASS)63±1°C |
Brine Temperature | 35°C±1°C |
Spray Quantity | 1.0~2.0 ml / 80cm2 / hr |
PH | Salt Spray Method (NSS ACSS6.5~7.2) Corrosion-resistant Testing Method(CASS)3.0~3.2 |
Lab Volume | 270L |
Brine Tank Capacity | 25L |
Power | AC220V,15A |
Multiple Safety Protection Devices | Current discharge protection, over pressure protection,over temperature protection, over load fuse protection |
Accessories | Testing Salt/ Measuring tank/ Equipment each 1 set |
Standard | CNS: 3627, 3385, 4159, 7669, 8886; JIS: D0201, H8502, H8610, K5400, Z2371; ISO: 3768, 3769, 3770; ASTM: B117, B268
|
Product Features
1, Durable hard 8 mm PVC construction, anti-corrosion and easy to clean.
2, Reservoirs with mixing system on stand.
3, Separate heating system apart from salt testing chamber to ensure accurate result and protect circuit.
4, Exposure zone lined with corrosion-resistant PVC sheets.
5, Clear cover allows viewing of test conditions.
6, Peaked cover prevents dripping of condensation onto samples.
7, Water seal and water level protection system.
8, Heated humidifying tower with air relief valve, adjustable tower tip to orient salt fog.
9, Automatic DI water fills to humidifying tower.
10, Digital temperature control.
11, Integral over-protection on heaters.
12, Low water cut-off protection on humidifying tower.
Salt Spray Corrosion Test Chamber Details
Salt spray tester
Company Profile
BOTO GROUP is a professional manufacturer of various kinds of testing equipment over 20 years. BOTO products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.
BOTO deals with customers from more than 150 countries and regions. Meanwhile, we are committed to cooperate with different dealers in different countries and regions in order to offer better service. Our mission is to help every customers establish testing labs to ensure the quality of their products.
Our company will continue to develop, innovate and keep faith. We combine with the international testing standards and the specific demands of customers that may establish a new banner in Chinese testing industry.
Main equipment
In the domestic market, we have many end customers, third-party testing institutions, research institutes, leading enterprises in different industries, and some agents. For the overseas market, we hope to find more general agents, distributors and importers to cooperate together.
Main market
The factory has the ability to calibrate, and the customer can also designate a third party organization to calibrate and issue a calibration report.
Production Process
Production Details
Factory Inspection
We control quality from the materials, electronic parts, controller,comppressor, solenoid valve, and many parts of the products.
Certification
Cooperative partners
BOTO ADVANTAGE
Customers photos
Our team